What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 16.06.2025 05:14

The bolt then partially travels down the line to your home.
nine
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
What are some ways to improve speed in sprinting, running uphill, and long/middle distance running?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
[image of Common-mode choke]
Why cant a narcissist admit when they are wrong?
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
He then describes the function of a fuse.
These are simplified answers to the original question, and does not change anything I wrote above.
But… the neutral is now “floating” because of the 1 ohm resistance.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Do Flat Earthers exist today? If so, where do they live?
One
This one hit behind the barn.
This device then solves the entire problem.
Lithium-Rich Mineral Found In Only One Place On Earth Has Its Recipe Finally Revealed - IFLScience
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Barnstars:
What are examples of real life forced feminization?
Can the fuse protect the electronic devices from lightning instead of a surge protector.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
An AC voltage/ current source, and an ac inductive load.
How do you feel about Donald Trump signing an executive order that says there are only two genders?
But it can get overloaded, and no longer works.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
What should I expect after a BBL surgery?
Because the load is inductive, the current lags the voltage.(by a bit).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What should I do if I love a girl and she apparently doesn't love me?
a photo is worth a thousand words.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, what happens?
What is one thing which you cannot stop however hard you try?
So, the voltage could go up to 500 volts, and the fuse will not open up.
In schematic diagrams this is the symbol for a fuse:
2024–10–14 [Omar Gharbi Omar Gharbi ]
Why do a lot of autistic people not know how to style their hair?
A fuse is a non-resetable over current circuit protector.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–10[John johnson John Johnson ]
At least they know the answer if they wanted it.
These devices are installed between the “hot” and “neutral” and protective ground.
Why do I feel sleepy after massage?
It seems Mohan does not understand the difference between a comment and an Answer.
Here is a simplified AC power diagram.
A circuit breaker is similar, but is resettable.
It also is a device that limits the change in current flow.
There are three different concepts here that are getting confused.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
For this case there are devices called Metal oxide varistors (MOV).
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
He then asserts :
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
but this device (an Inductor) … impedes the rapid changes in the current.
(Dc diagram shown, AC is similar).
He then describes Rainy Season and Lightning.
Edit 2024–10.
The other is “what does a “fuse” do?”
There are two important concepts here.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
What is lightning?
What does a fuse do?
The third is lightning and “how it gets conducted into a home.”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
[old diagram got deleted by accident]
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
This is where the MOV conducts again, and dissipated the energy.
what exactly is a ‘surge’ protector?
but I think this circuit , shows a few more pieces.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
First Sentence:
I post the exact comment here.
Now when you have a certain ac resistance, then a current flows in a loop.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
One is “what exactly is in a ‘surge protector’ ? ”
eight
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
the problem then depends on "how fast does the fuse operate?".
Upvotes:
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.